Edge Paster Hfeg-5280c-CH with High Frequency Technology

Conveyor Belt Type High Frequency Edge Glued Panel Press 1.Introduction:This model is the best choice for short furniture panel joining. Width and length can be free jointed.There are following advantages:1). Can place wood pieces in right position, avoiding dislocation problem and damage cylinder.2). Machine working table

Featured Products

Conveyor Belt Type High Frequency Edge Glued Panel Press
 
1.Introduction:
This model is the best choice for short furniture panel joining. Width and length can be free jointed.
There are following advantages:
1). Can place wood pieces in right position, avoiding dislocation problem and damage cylinder.
2). Machine working table processed by non-cohesive material. Glue is easy to remove and assure panel quality.
3). Top working table designed with lifting device. Make sure panel straight and flatness.Save more wood material for next sanding process.
4). Locate high frequency generator and hydraulic system on the top of machine, saving factory space.
6). High efficiency: HF heating 1-2minutes finish one standard panel(8x4 feet, 20mm thick ).
7).Low power costs: HF power only heat glue line, save the power. (0.6-1 kwh per panel)
8).Labor saving: Automatic control. One button can finish whole cycle.
9).No pollution: HF power only needs electricity, dust free and clean

2.Parameter:
ModelHFEG-2580C-CHHFEG-3280C-CHHFEG-4280C-CHHFEG-5280C-CH
Control TypePLC Automatically control, fault checking and alarming
Working table2500x1300mm3200x1300mm4200x1300mm5200x1300mm
Thickness10-80mm10-80mm10-80mm10-80mm
Vertical Pressure12T12T24T24T
Horizontal Pressure36T48T60T72T
Feeding Type  One Button Automaticlly Conveyor Belt Feeding

3.Detailed Images:
Edge Gluer Board Press Hfeg-5280c-CH with High Frequency Technology
Hydraulic system
Edge Gluer Board Press Hfeg-5280c-CH with High Frequency Technology
Edge Gluer Board Press Hfeg-5280c-CH with High Frequency Technology
Edge Gluer Board Press Hfeg-5280c-CH with High Frequency Technology

4.FAQ:
List some questions customers care about, if you have more quotations, please feel free to contact with us
1.  Q: What's the MOQ?
      R:  One set will be ok.
2.  Q: Provide customized machine Yes or NO?
     R: Yes. We have professional designers and engineers to supply customized machines. 
3.  Q:What is payment terms?
     R: 30%T/T in advance, the balance paid before shipment after insepction.
4.  Q:What is warranty time?
     R: One year.

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours